Are you using an Android device? If yes, are you searching for a simple way to connect your device to a computer? If yes is your answer, then you should download and install ADB driver on your computer to connect your device with it successfully. But, if you are planning to flash stock firmware on your Spreadtrum device using your computer then installing ADB driver alone will not help you. For that purpose, you will need to download and install Spreadtrum Driver on your Windows computer.
If you don’t know how to download Spreadtrum (SPD) driver or how to install it on your computer, don’t worry at all. Here, I have provided the links to download Spreadtrum (SPD) driver along with the instructions to install it on your computer.
Tutorial To Install Spreadtrum Driver On Your Computer
Step 2: Next, open Device Manager window and follow this path Action -> Add Legacy Hardware.
Step 3: Now click “Next” in the Add legacy hardware wizard.
Step 4: In the next window, choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Now choose “Show all devices“ and click on “Next”. Once done, choose the “Have a disk” option to select the extracted Spreadtrum driver file (Step 1) from your computer.
Step 6: Next, select “x64” setup if you are using a 64 bit operating or “x32” for a 32-bit operating system.
Step 7: Now click on “Next” to install the new hardware.
Step 8: If a Windows security prompt shows up, click on “Install this driver software anyway”.
Step 9: In the next window, click on “Finish” to complete the installation process.
That’s it. Now you have successfully installed Spreadtrum (SPD) driver on your computer.
If you would like to get tutorials for installing other USB drivers on your computer, kindly visit our tutorials page.
If you encounter any errors while following this tutorial, do let me know by using the comments sections below.