Samsung Galaxy J7 is a high-quality Android smartphone, which comes with a 5.5 inch super AMOLED touchscreen display powered by 1.5 GHz octa-core processor along with a 1.5 GB RAM and the device runs on Android 5.1 Lollipop operating system. If you have purchased this smartphone and looking for a way to gain root privileges, you are in the right page as I have given a tutorial to root Samsung Galaxy J7 here.
Along with the rooting tutorial, I have also provided a tutorial for installing TWRP recovery in Galaxy J7 using Odin. The advantages of gaining root privileges are that it will let you install custom-built Android applications which only runs on rooted devices, custom ROM firmware’s, etc.
WARNING: Rooting your Samsung smartphone will void its warranty, and you won’t be able to claim it back until you unroot your device. Also, if your device gets damaged during the rooting procedure, don’t hold me responsible. Proceed with CAUTION.
Step 1: Before getting started with a rooting procedure, it is always important to take a complete backup of personal data in your smartphone. So take a complete backup using Samsung Kies.
Step 2: Next, you will need to enable USB debugging mode in your smartphone by following this path: Settings -> Developer Options -> USB Debugging.
If you can’t see the Developer options in your Settings, then you will need to enable it by following this path: Settings -> About Phone -> Build Number (tap on it for seven times to enable Developer Mode). Also, if you are using the Indian version of Samsung Galaxy J7, you will need to enable OEM Unlock by following this path: Settings -> Developer Options -> Enable OEM Unlock.
Step 3: Now, download Samsung Galaxy J7 USB driver and install it in your computer. Only by doing so, you will be able to connect your smartphone with the computer.
Step 4: Make sure that your device has at least 50-60% battery backup in it before getting started with the rooting procedure.
Once you have finished all these prerequisites, you can follow the tutorials given below.
Tutorial To Install TWRP Recovery In Samsung Galaxy J7:
Step 1: To get started, download Odin package and extract it to a folder in your computer. Next, download TWRP recovery for Samsung Galaxy J7
and save it in your computer as well. Once done, launch the Odin3 window.
Step 2: Now, switch off your Galaxy J7 smartphone and boot it into the bootloader mode by pressing and holding the Volume Up, Home and Power buttons simultaneously for few seconds.
Step 3: Once your Samsung device boots into the Bootloader or Download mode, connect it with the computer using the original USB data cable. If you have installed the USB drivers of your device properly, then you will see the “Added” message in the Log box of Odin.
Step 4: Now, click on the AP button in Odin and select the “twrp-220.127.116.11-j7elte.tar” file from the folder where you have TWRP recovery extracted files.
Step 5: Next, make sure that the “Auto Reboot” and “F. Reset Time” boxes are ticked in Odin. Also, ensure that the “Re-Partition” option is not enabled. Once everything is in place, click the “Start” button in Odin to begin the flashing process.
Step 6: If you have done everything correctly as per the instructions are given here, TWRP recovery will get flashed in your device. Once the flashing process is over, it will automatically reboot. Also, you will get the “PASS” message in Odin as shown in the screenshot below.
That’s it. Now you have successfully finished flashing TWRP recovery in Samsung Galaxy J7 smartphone. Let’s find out the way to root this smartphone.
Tutorial To Root Samsung Galaxy J7:
Step 1: To get started, download SuperSU zip package to your computer. Next, connect your smartphone to the computer using the original USB data cable and transfer the SuperSU file to your device’s internal memory. Once done, unplug your smartphone from the computer.
Step 2: Now, switch off your smartphone and boot it into the TWRP recovery mode by pressing the Volume Down, Home and Power buttons simultaneously for few seconds.
Step 3: Once your device boots into the TWRP recovery mode, flash the SuperSU package by following this path: Install -> Select Zip To Install (select the SuperSU zip package).
Step 4: Once the flashing process gets finished, click on “Reboot System” to finish the rooting process.
That’s it. Now you have successfully finished rooting Samsung Galaxy J7. For confirmation, open up your Apps Menu and look for the SuperSU app. If it is located there, then you have completed the rooting procedure successfully. Alternatively, you can confirm the root privileges of your smartphone by using the Root Checker app (available in Google Play Store).
If you own a smartphone or tablet other than Samsung Galaxy J7 and would like to get rooting tutorials for the same, kindly visit our Rooting Tutorials page.
If you encounter any issues while following this procedure, do let me know via comments.