Are you using an Android device? If yes, are you searching for a simple way to connect your device to a computer? If yes is your answer, then you should download and install ADB driver on your Windows computer. But, if you are planning to flash stock firmware on your SpreadTrum device using your computer, then installing ADB driver alone will not help you. For that purpose, you will need to download and install SpreadTrum USB Driver on your Windows computer.
If you don’t know how to install SPD USB Driver on your computer, don’t worry. Here, I have provided the step by step instructions to install SpreadTrum USB driver on your computer.
Tutorial To Install SpreadTrum USB Driver Manually On Your Computer
Step 1: To get started, download Spreadtrum driver manual installation file to your computer. Once downloaded, extract it on your desktop.
Step 2: Next, open Device Manager window and follow this path Action -> Add Legacy Hardware.
Step 3: Now click “Next” in the Add legacy hardware wizard.
Step 4: In the next window, choose “Install the hardware that I manually select from the list (Advanced)” and click “Next“.
Step 5: Now choose “Show all devices“ and click on “Next”. Once done, choose the “Have a disk” option to select the extracted Spreadtrum driver file (Step 1) from your computer.
Step 6: Next, select “x64” setup if you are using a 64 bit operating or “x32” for a 32-bit operating system.
Step 7: Now click on “Next” to install the new hardware.
Step 8: If a Windows security prompt shows up, click on “Install this driver software anyway”.
Step 9: In the next window, click on “Finish” to complete the installation process.
That’s it. Now you have manually installed the SPD USB driver on your computer.
Tutorial To Install SpreadTrum USB Driver Automatically On Your Computer
Step 1: To get started, download SPD USB driver automatic installation (setup) file to your Windows computer. Once done, extract it to a folder.
Step 2: Next, open the driver folder based on your Windows operating system i.e., if you are using Windows 10 on your computer, then open Win 10 folder.
Step 3: Now click on DriverSetup.exe to launch the installation Window.
Step 4: Next in the UNISOC Driver Installation Package window, click on Next to begin the SPD USB driver installation process.
Step 5: Once the installation process begins, it will take a few minutes for it to get completed. Once it does, you can click on Finish in the SPD Device Driver Installation Wizard Window.
Step 6: Finally, restart your computer.
That’s it. Now you have automatically installed the SPD USB driver on your Windows computer.
You can successfully connect your SpreadTrum/Unisoc powered Android smartphones or tablets to your Windows computer without any issues.
If you would like to get tutorials for installing other USB drivers on your computer, kindly visit our tutorials page.
If you encounter any errors while following this tutorial, do let me know by using the comments sections below.
how to remove code 10 error while installing spd usb driver
Sathishkumar Varatharajan says
Hi, Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error.
Marco Morales says
Al finalizar me dice error en la instalación del dispositivo, el INF de otro fabricante no contiene información de firma digital
Hi, Please Refollow the Procedure carefully. Thanks!